Dunlop Jacks Page 2
Last updated
15 April 2021
![]() |
![]() |
Database For Vintage and Classic Dunlop Vehicle Jacks
Other vintage British car jack databases:
George Radion in Australia has a database on Australian-made Jacks
Page 1 for Miscellaneous Jacks and Numbered Jacks
LJ Series Jacks followed by Trolley Jacks
|
|
|
Dunlop LJ1 Description The LJ1 is a twin screw jack. On one side is cast LJ1 horizontally around the screw housing and DUNLOP vertically down the barrel. On the other side is PAT 235497 around the screw housing and 15CWT DL down the barrel. Measures 14.5cm (5.5") retracted. Photos courtesy of Paul Gwyther. Applicable Vehicles: Not known Jack Handle Type: As shown in last photo. 42 inches long. Year Dates Noted:
Value: Average price paid in 2013 = £14.99 - 1 sale Average price paid in 2015 = £12.00 - 1 sale Average price paid in 2018 = £5.50 - 1 sale Average price paid in 2019 = £8.72 - 4 sales
|
|
Dunlop LJ2 Description The LJ2 'Junior' is an 7 1/2 cwt single screw jack. On one side is cast DUNLOP LJ2 vertically down the barrel. On the other side is 7 1/2 CWT 7" down the barrel. The jack is 7" down and 11.5" extended. The jack shares the same body with the LJ4. Applicable Vehicles: Not known Jack Handle Type: 16" long with 12" wooden cross piece held to handle by butterfly screw. Year Dates Noted:
Value: Average price paid in 2013 = £8.00 - 2 sales Average price paid in 2014 = £11.24 - 4 sales Average price paid in 2015 = £9.12 - 4 sales Average price paid in 2016 = £10.80 - 4 sales Average price paid in 2017 = £5.19 - 1 sale Average price paid in 2018 = £41.00 - 1 sale Average price paid in 2019 = £13.99 - 1 sale £9.99 paid on UK Ebay 2 May 2020 - NH £25.00 paid on UK Ebay 6 May 2020 - WH £10.00 paid on UK Ebay 8 October 2020 - NH £11.61 paid on UK Ebay 4 December 2020 - NH £9.99 paid on UK Ebay 2 March 2021 - NH |
|
Dunlop LJ2S Description The LJ2S 'Junior' is a single screw jack. On one side is cast DUNLOP vertically down the barrel. On the other side is LJ2S cast down the barrel and MADE IN ENGLAND stamped into the casing. The jack is 7" down and 11.5" extended. Photos and information courtesy of JLS Exmouth. Applicable Vehicles: Not known Jack Handle Type: 18" long Year Dates Noted:
Value: Average price paid in 2014 = £13.50 - 1 sale
|
|
Dunlop LJ4 Description The LJ4 'Junior' is an 8 cwt single screw jack. On one side is cast DUNLOP 7 vertically down the barrel. On the other side is LJ4 down the barrel. The jack is 9" down and 15.5" extended. The jack shares the same body with the LJ2. Applicable Vehicles: Not known Jack Handle Type: 18" long Year Dates Noted:
Value: Average price paid in 2015 = £4.99 - 1 sale Average price paid in 2017 = £9.99 - 1 sale £13.00 paid on UK Ebay 2 February 2020 - NH
|
|
Dunlop LJ5 Description The LJ5 is a 15 cwt double screw jack. On one side is cast DUNLOP vertically down the barrel. On the other side is LJ5 down the barrel and 15CWT across the base. The jack is 5" down and 11" extended. Remarkable similarities to the Lake & Elliot S411. Applicable Vehicles: Not known Jack Handle Type: As shown in 3rd and 4th photos. Year Dates Noted:
Value: Average price paid in 2015 = £25.70 - 3 sales Average price paid in 2017 = £23.16 - 3 sales Average price paid in 2019 = £5.00 - 1 sale £19.99 paid on UK Ebay 30 June 2020 - NH
|
|
Dunlop LJ8 Description The LJ8 is a 10 ton single screw jack. On one side is cast DUNLOP vertically down the barrel. Along the base is No 8. The jack is 10.5" retracted and 15.75" extended. Applicable Vehicles: Not known Jack Handle Type: 2-piece 33" long. Year Dates Noted:
Value:
|
|
Dunlop LJ10 Description The LJ10 is a single hydraulic ram with a manual screw extension. Cast on one side 1 TON HYDRO LJ10 and on the other behind the handle DUNLOP. Applicable Vehicles: Not known Jack Handle Type: As shown in the photos. Year Dates Noted:
Value: Average price paid in 2015 = £9.99 - 1 sale
|
|
Dunlop LJ13 Description The jack is a single ram jack plus a manual screw extension. It is cast LJ13, 1 TON HYDRO, MADE 02/63, MADE IN ENGLAND, 1672. It is 7" retracted, has a 4" lift plus a 4.5" manual screw extension. Overall height is 15.5". A similar one has just No.13,with no LJ. Applicable Vehicles: Not known Jack Handle Type: As Shown in the photo, 30" long. Year Dates Noted: 1963 Value: Average price paid in 2013 = £30.99 - 1 sale Average price paid in 2014 = £0.99 - 1 sale Average price paid in 2015 = £7.00 - 1 sale Average price paid in 2016 = £5.00 - 1 sale Average price paid in 2017 = £3.00 - 1 sale Average price paid in 2018 = £28.00 - 1 sale £9.99 paid on UK Ebay 10 January 2020 - NH
|
|
Description The LJ17A is a 6 ton single ram jack plus a manual screw extension. It is 9.25" retracted with a 5.75" lift, plus a 6" manual extension. Overall height is 21". The jack shares the same casing with the LJ17B, LJ26A/B and LJ36B. The 3rd photo shows it alongside the LJ26A for comparison. Interestingly both jacks have LD4 punched into the pump handle slotted housing. All photos and data courtesy of New Moody. Applicable Vehicles: Not known Jack Handle Type: 2-piece, 36" long. Year Dates Noted: Average price paid in 2017 = £10.00 - 1 sale £4.50 paid on UK Ebay 9 June 2020 - NH
|
|
Dunlop LJ17B Description The LJ17B is a 6 ton single ram jack plus a manual screw extension. It is 9.75" retracted with a 5.75" lift, plus a 6" manual extension. Overall height is 21". The jack shares the same casing with the LJ17A, LJ26A/B and LJ36B. Applicable Vehicles: Not known Jack Handle Type: 2-piece, 36" long. However, the last photo shows a single piece. Year Dates Noted:
Value: Average price paid in 2014 = £5.00 - 1 sale Average price paid in 2015 = £11.00 - 3 sales Average price paid in 2017 = £22.67 - 1 sale Average price paid in 2018 = £25.99 - 1 sale Average price paid in 2019 = £15.99 - 1 sale
|
|
Dunlop LJ21A/B Description The LJ21A/B is a 6 ton double ram jack with a single manual screw extension. Retracted it measures 7.75" and a 2.5" lift, plus a manual 8" screw, giving a maximum height of 18.25". Applicable Vehicles: Not known Jack Handle Type: as shown, 36" long. Year Dates Noted: Not known Value: Average price paid in 2016 = £0.99 - 1 sale £19.99 paid on UK Ebay 7 February 2020 - WH £10.50 paid on UK Ebay 6 May 2020 - NH
|
|
Description The LJ26A is an 8 ton single ram jack plus a manual screw extension. It is cast DUNLOP 8 TON LJ26A on one side; MADE IN ENGLAND behind the lever and punched LD4 on the lever. The hexagon nut is punched LW 5’ and cast 7. Photos and information courtesy of NewMoody. Applicable Vehicles: Not known Jack Handle Type: Not known. Year Dates Noted:
Value: £5.00 paid on UK Ebay 25 August 2020 - NH £3.99 paid on UK Ebay 23 September 2020 - NH |
|
Dunlop LJ26B - 4 Ton Description The LJ26B appears in at least 2 forms. This is the 4 ton single ram jack plus a manual screw extension. No details other than shown in the photos. Applicable Vehicles: Not known Jack Handle Type: As shown in 3rd photo. Year Dates Noted:
Value: Average price paid in 2015 = £9.99 - 2 sales Average price paid in 2016 = £5.00 - 1 sale Average price paid in 2017 = £12.00 - 1 sale Average price paid in 2018 = £20.00 - 1 sale Average price paid in 2019 = £28.00 - 2 sales £5.00 paid on UK Ebay 14 March 2020 - NH
|
|
Description This is the other LJ26B which is a 8 ton single ram jack plus a manual screw extension. It is 10" retracted with a 5" lift, plus a 7" manual extension. Overall height is 22". Applicable Vehicles: Not known Jack Handle Type: As shown in 4th photo. Year Dates Noted:
Value: Average price paid in 2013 = £1.04 - 1 sale Average price paid in 2019 = £35.99 - 1 sale £8.50 paid on UK Ebay 9 January 2020 - NH
|
|
Description Only information as shown in the photos. The 3rd photo is cast DUNLOP 10 TON LJ3?. The last number is unreadable but looks like it could be a 2 or 3. Applicable Vehicles: Not known Jack Handle Type: Not known. Year Dates Noted:
Value: Average price paid in 2018 = £5.00 - 1 sale
|
|
Dunlop LJ34 Description The LJ34 is a 1 ton jack. The jack rises in 2 stages. The lowest height is 6 1/4 "; the 1st raise is to 10", then the final lift is to 14". The pistons are threaded internally and raised by an internal screw. It is likely that there is also a manual screw extension as shown in the LJ35 below. Photos and details courtesy of Roger Bennett. Applicable Vehicles: Not known Jack Handle Type: As shown in the second photo. 29" long. Year Dates Noted:
Value: Average price paid in 2015 = £5.50 - 1 sale Average price paid in 2017 = £54.49 - 3 sales Average price paid in 2018 = £64.50 - 2 sales Average price paid in 2019 = £50.00 - 1 sale £26.00 paid on UK Ebay 2 March 2020 - NH £10.00 paid on UK Ebay 20 July 2020 - NH £52.00 paid on UK Ebay 31 August 2020 - NH |
|
Description The LJ35 is a 1 ton double screw rams and a manual screw extension jack. It is 6.5" lowered and 14.5" extended. Very similar to the LJ34 above. Applicable Vehicles: Pre-war Derby Bentleys and some Rolls Royces. Jack Handle Type: 25.5" two piece rod with wooden handle. The winder end will look like a starter handle. Year Dates Noted: 1945, 1946 Value: Average price paid in 2013 = £74.20 - 1 sale Average price paid in 2014 = £102.00 - 1 sale Average price paid in 2016 = £102.00 - 1 sale Average price paid in 2018 = £81.66 - 3 sales Average price paid in 2019 = £50.00 - 1 sale
|
|
Description The LJ36A is a 4 ton jack, single ram with a manual screw extension. On one side it is cast DUNLOP 4 TON LJ36A. Only other details as shown in the photos Applicable Vehicles: Not known. Jack Handle Type: Single round bar as shown in last photo. Year Dates Noted:
Value: Average price paid in 2018 = £15.98 - 3 sales Average price paid in 2019 = £19.99 - 2 sales £10.00 paid on UK Ebay 24 October 2020 - NH |
|
Description The LJ36B is a 4 ton jack, single ram with a manual screw extension. On one side it is cast DUNLOP 4 TON LJ / 36B. On the other is MADE IN ENGLAND on the jack body and DUNLOP on the handle. It is 9" retracted with a 5" lift, plus 6.25" manual extension, giving a maximum height of 21". Photos and data courtesy of Fred >>>>. Applicable Vehicles: Bedford TK trucks Jack Handle Type: Single bar as shown in final photo. The handle will only go in one way and locks into place on notch no. 2 to raise, pull the ring to remove; to lower it is notch no. 1 and press down. Year Dates Noted: Circa 1959 Value: Average price paid in 2018 = £5.00 - 1 sale Average price paid in 2019 = £18.58 - 3 sales £25.00 paid on UK Ebay 27 June 2020 - WH |
|
Dunlop LJ/38B Description The LJ/38B is a 4 ton jack, single ram with a manual screw extension. It is cast DUNLOP 4 TONS diagonally and LJ/38B horizontally. The other side is MADE IN ENGLAND with DUNLOP on the operating arm. Applicable Vehicles: Not known Jack Handle Type: As shown in 3rd photo.. Year Dates Noted: Not known Value: Average price paid in 2015 = £10.25 - 2 sales
|
|
Dunlop LJ46 B Description The LJ46 B is a single hydraulic ram with a manual screw extension. It is 10.50" high. Cast DUNLOP 30CWT LJ46 B on one side; DUNLOP MADE IN ENGLAND on the other. Applicable Vehicles: Not known Jack Handle Type: See last photo. The handle in earlier photos is incorrect. Year Dates Noted:
Value: Average price paid in 2013 = £17.32 - 4 sales Average price paid in 2018 = £24.99 - 3 sales £0.99 paid on UK Ebay 8 November 2020 - WH |
|
Dunlop LJ47 Hydraulic Version Description The LJ47 is a 1 ton single ram with a manual screw extension. It measures 5.5" retracted with a 7.25" screw extension. Overall height is12.75" See entry below for screw version. Applicable Vehicles: Not known Jack Handle Type: 30" long. Year Dates Noted:
Value: Average price paid in 2016 = £9.99 - 1 sale
|
|
Description The LJ47 is a 1 ton 2-stage screw jack. It is 5.75" closed and 12.75" extended. The base is 4.25" square. The pinion has flats for spanner jaws of just over 1.25" (3.35cm). Along the base it is cast on one side DUNLOP LJ47 and on the opposite side MADE IN ENGLAND. The main body is cast 1 TON. Details courtesy of NewMoody. Applicable Vehicles: Not known Jack Handle Type: Not known. Year Dates Noted:
Value: Average price paid in 2017 = £15.00 - 1 sale £20.00 paid on UK Ebay 3 January 2021 - NH £13.50 paid on UK Ebay 27 January 2021 - NH
|
|
Description This jack looks remarkably similar to the LJ46B above. Only details as shown in the photos . Cast DUNLOP 30CWT LJ46 B on one side; DUNLOP MADE IN ENGLAND on the other. Applicable Vehicles: Not known Jack Handle Type: Not known Year Dates Noted:
Value: Average price paid in 2016 = £15.00 - 1 sale Average price paid in 2017 = £20.00 - 1 sale
|
|
Dunlop LJ56 Description The LJ56 appears to be a single ram hydraulic jack plus a manual screw extension. Cast DUNLOP 12 TONNE LJ56 ENGLAND. Applicable Vehicles: Not known Jack Handle Type: Not known Year Dates Noted:
Value: Average price paid in 2013 = £10.00 - 1 sale £18.50 paid on UK Ebay 16 February 2020 - NH |
|
|
|
Description 157cm long. Handle length 74cm. Jacking height retracted 15 cm. Jacking height extended 42cm. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted:
Value: Average price paid in 2017 = £20.00 - 1 sale Average price paid in 2019 = £15.00- 1 sale £10.00 paid on UK Ebay 27 February 2020
|
Awaiting image
|
Description The only detail I have on the LJ150 is the data sheet. Photo required please. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted:
Value:
|
|
Dunlop Trolley LJ165A Jack 30 CWT Description LJ165A 30 CWT hydraulic garage trolley jack. No other information known other than shown in photos. Applicable Vehicles: None; garage jack Jack Handle Type: Integrated Year Dates Noted:
Value: Average price paid in 2016 = £47.50 - 2 sales Average price paid in 2017 = £0.99 - 1 sale Average price paid in 2019 = £15.00 - 1 sale
|
|
Description LJ170 2.5 ton hydraulic garage trolley jack. No other information known other than shown in photos. Applicable Vehicles: None; garage jack Jack Handle Type: Integrated Year Dates Noted:
Value: Average price paid in 2019 = £15.00 - 1 sale
|
|
Dunlop LJ175 Trolley Jack Description Cast DUNLOP / TROLLEY JACK / No. LJ175 / 2 1/2 TONS. Lift height 34", 64" long Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted: Not known Value: Average price paid in 2015 = £126.99 - 2 sales Average price paid in 2016 = £60.00 - 1 sale Average price paid in 2017 = £41.33 - 3 sales Average price paid in 2018 = £15.00 - 1 sale Average price paid in 2019 = £55.00 - 1 sale £10.00 paid on UK Ebay 14 July 2020
|
|
Description Cast DUNLOP / TROLLEY JACK / No. LJ180 / 5 TONS. Lift height 21", 53" long Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted: Not known Value: Average price paid in 2018 = £67.00 - 1 sale £156.00 paid on UK Ebay 30 November 2020 £41.00 paid on UK Ebay 17 February 2021
|
|
Description Only details as shown in the photos. Any information most welcome. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted: Not known Value: Average price paid in 2016 = £21.78 - 1 sale
|
|
Description Described by the vendor as 2 Ton Min height 5.6"; max height 22". Only other details as shown in the photos. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted: Not known Value: Average price paid in 2017 = £2.20 - 1 sale Average price paid in 2018 = £47.22 - 1 sale
|
|
Description Stamped 2 1/2 TONS. Only other details as shown in the photos. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted: Not known Value: Average price paid in 2018 = £38.00 - 1 sale £10.00 paid on UK Ebay 28 March 2021
|
|
Description Only details as shown in the photos. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted: Not known Value: Average price paid in 2017 = £20.00 - 1 sale
|
|
Description Unusual garage jack, having no wheels. Cast DUNLOP MADE IN ENGLAND. 16cm high retracted and 30 cm raised. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted: Not known Value: Average price paid in 2019 = £25.00 - 1 sale
|
|
Description Only details as shown in the photos. It or the Lake & Elliot identical jack features at Brooklands in the 1920s on an MG K3 wheel change. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted: Not known Value: Average price paid in 2018 = £10.00 - 1 sale
|
|
Dunlop Trolley Jack No. 12 Description Cast DUNLOP MADE IN ENGLAND. No. 12 PAT No. 160327 301787. Applicable Vehicles: Garage jack Jack Handle Type: As shown in second photo Year Dates Noted: Patent is circa 1922 Value: Average price paid in 2013 = £12.16 - 3 sales Average price paid in 2014 = £17.24 - 5 sales Average price paid in 2015 = £35.50 - 2 sales Average price paid in 2016 = £17.30 - 3 sales Average price paid in 2017 = £23.50 - 3 sales Average price paid in 2018 = £25.00 - 1 sale Average price paid in 2019 = £44.75 - 4 sales Average price paid in 2020 = £28.25 - 4 sales
|
|
Description Only details as shown in the photos. Applicable Vehicles: Garage jack Jack Handle Type: As shown in 3rd photo with wooden grips. Year Dates Noted:
Value: Average price paid in 2017 = £50.00 - 1 sale
|
|
Description The Dunlop No. 19 is a steerable garage jack. Cast DUNLOP on the rear wheel cross beam and No.19 on the nose shroud. Overall length excluding handle 1.30 meters. Handle height 1.13 meters. Extended height 35cm with the manual screw extending up another 5 cm. Width across main load carrying wheels is 32cm. The load carrying wheels can be steered by turning the handle when in the vertical position which makes the jack very manoeuvrable. Photos and data courtesy of Robert Middelmann. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted:
Value: Average price paid in 2015 = £10.00 - 1 sale Average price paid in 2019 = £16.55 - 1 sale
|
|
Dunlop Type 25 Description No information known other than shown in the photo. Applicable Vehicles: Not known Jack Handle Type: Integrated Year Dates Noted:
Value: Average price paid in 2013 = £9.99 - 1 sale Average price paid in 2015 = £15.00 - 1 sale Average price paid in 2018 = £5.00 - 1 sale
|
|
Description Cast DUNLOP No.25 on one side and No.25 DUNLOP on the other. The handle bracket is cast PATS 408646 453898 TO LIFT 15 CWT MADE IN ENGLAND. Other details as shown in the photos. Applicable Vehicles: Garage jack Jack Handle Type: Integrated Year Dates Noted: 1936 Value: Average price paid in 2017 = £23.50 - 3 sales
|
|
Description Cast DUNLOP No. 50. Only other details as shown inphotos. Applicable Vehicles: Garage jack. Jack Handle Type: Integrated Year Dates Noted:
Value: Average price paid in 2017 = £10.50 - 1 sale
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Description Cast DUNLOP No. 60. 145cm long and 50cm wide. Only other details as shown inphotos. Applicable Vehicles: Garage jack. Jack Handle Type: Integrated Year Dates Noted:
Value:£56.00 paid on UK Ebay
11 April 2021 |
|
Description This unusual pneumatic trolley jack is 4" lowered and 18" raised depending on which insert is used. No information other than shown in photos. Applicable Vehicles: Not known Jack Handle Type: Integrated Year Dates Noted:
Value: Average price paid in 2014 = £155.00 - 1 sale £32.00 paid on UK Ebay 26 April 2020 |
|
Dunlop Trolley Jack 2.5 Ton Description 2.5 Ton hydraulic garage jack. No other information known other than shown in photos. Applicable Vehicles: None; garage jack Jack Handle Type: Integrated Year Dates Noted:
Value: Average price paid in 2014 = £45.00 - 1 sale Average price paid in 2015 = £35.43 - 2 sales Average price paid in 2016 = £60.00 - 1 sale
|
Page 1 Page 2